LC Method for the Determination of the Stability of Levetiracetam Drug Substance under Stressing Conditions

Levetiracetam is used in combination with other medications to treat certain types of seizures in people with epilepsy. Levetiracetam is in a class of medications called anticonvulsants and it works by decreasing abnormal excitement in the brain. A chromatographic separation was achieved on a YMC pack ODS AQ, 250 mm × 4.6 mm, 5 μm column using diluted phosphoric acid and acetonitrile in the ratio 85:15 v/v. Forced degradation studies were performed on the levetiracetam drug substance. The drug substance was degraded to Imp-B during acid and base hydrolysis. When the stress samples were assayed, the mass balance was matching. The sample solution and mobile phase was found to be stable up to 48 h at 25 °C. The developed method was validated with respect to linearity, accuracy, precision and robustness.     

Topological Polymer Chemistry Enters Surface Science: Linear versus Cyclic Polymer Brushes

The cyclic polymer topology strongly alters the interfacial, physico‐chemical properties of polymer brushes, when compared to the linear counterparts. In this study, we especially concentrated on poly‐2‐ethyl‐2‐oxazoline (PEOXA) cyclic and linear grafts assembled on titanium oxide surfaces by the “grafting‐to” technique. The smaller hydrodynamic radius of ring PEOXAs favors the formation of denser brushes with respect to linear analogs. Denser and more compact cyclic brushes generate a steric barrier that surpasses the typical entropic shield by a linear brush. This phenomenon, translates into an improved resistance towards biological contamination from different protein mixtures. Moreover, the enhancement of steric stabilization coupled to the intrinsic absence of chain ends by cyclic brushes, produce surfaces displaying a super‐lubricating character when they are sheared against each other. All these topological effects pave the way for the application of cyclic brushes for surface functionalization, enabling the modulation of physico‐chemical properties that could be just marginally tuned by applying linear grafts.     

Ultrafast Photogenerated Hole Extraction/Transport Behavior in a CH3NH3PbI3/Carbon Nanocomposite and Its Application in a Metal‐Electrode‐Free Solar Cell

Aligned and flexible electrospun carbon nanomaterials are used to synthesize carbon/perovskite nanocomposites. The free‐electron diffusion length in the CH₃NH₃PbI₃ phase of the CH₃NH₃PbI₃/carbon nanocomposite is almost twice that of bare CH₃NH₃PbI₃, and nearly 95 % of the photogenerated free holes can be injected from the CH₃NH₃PbI₃ phase into the carbon nanomaterial. The exciton binding energy of the composite is estimated to be 23 meV by utilizing temperature‐dependent optical absorption spectroscopy. The calculated free carriers increase with increasing total photoexcitation density, and this broadens the potential of this material for a broad range of optoelectronics applications. A metal‐electrode‐free perovskite solar cell (power conversion efficiency: 13.0 %) is fabricated with this perovskite/carbon composite, which shows great potential for the fabrication of efficient, large‐scale, low‐cost, and metal‐electrode‐free perovskite solar cells.     

Novel strategies for the synthesis of anthrapyran antibiotics: discovery of a new antitumor agent and total synthesis of (S)-espicufolin

Two high-yielding strategies for the synthesis of 4H-anthra[1,2-b]pyran antibiotics have been developed giving access to novel antitumor agent (ED(50) 1.5 microm) and to (S)-espicufolin (3). A key step for the assembly of the tetracyclic 4H-anthra[1,2-b]pyran-4,7,12-trione skeleton is the nucleophilic addition of an aryl lithium species onto an aldehyde which allows the introduction of either an ynone or 1,3-diketo side chain, serving as precursors for an acid-catalysed cyclisation.     

Quantification of tenatoprazole in rat plasma by HPLC: validation and its application to pharmacokinetic studies

A simple, reliable HPLC method with UV detection (295 nm) in rat plasma was developed and validated for quantification of tenatoprazole, a novel proton pump inhibitor, which is in clinical trials. Following a single-step liquid-liquid extraction, the analyte and internal standard were separated using an isocratic mobile phase on a reverse phase C(18) column. The lower limit of quantitation was 20 ng/mL, with a relative standard deviation of less than 10%. A linear dynamic range of 20-6000 ng/mL was established. This HPLC method was validated with between-batch and within-batch precision of 2.9-6.3 and 1.4-5.8%, respectively. The between-batch and within-batch accuracy was 95.1-104.1 and 92.4-101.0%, respectively. This validated method is simple and repeatable enough to be used in pharmacokinetic studies.     

Quantification of fexofenadine in human plasma by liquid chromatography coupled to electrospray tandem mass spectrometry using mosapride as internal standard

A rapid high-performance liquid chromatography/positive ion electrospray tandem mass spectrometry method was developed and validated for the quantification of fexofenadine in human plasma using mosapride as internal standard. Following solid-phase extraction, the analytes were separated using an isocratic mobile phase on a reverse-phase column and analyzed by MS/MS in the multiple reaction monitoring mode using the respective [M+H]+ ions, m/z 502/466 for fexofenadine and m/z 422/198 for the IS. The method exhibited a linear dynamic range of 1-500 ng/mL for fexofenadine in human plasma. The lower limit of quantification was 1 ng/mL with a relative standard deviation of less than 5% for fexofenadine. Acceptable precision and accuracy were obtained for concentrations over the standard curve range. The total chromatographic run time of 2 min for each sample made it possible to analyze more than 400 human plasma samples per day. The validated method has been successfully used to analyze human plasma samples for application in pharmacokinetic, bioavailability or bioequivalence studies.     

Excited-state deactivation of branched two-photon absorbing chromophores: a femtosecond transient absorption investigation

Branched macromolecular structures are now an important area of research for enhanced two-photon absorption (TPA) cross sections. The mechanism of this enhancement has been suggested as a complex interplay between intramolecular interactions and the extent of charge-transfer character in the branches. In order to probe these processes more clearly, excited-state dynamics of multibranched chromophores by means of femtosecond transient absorption spectroscopy are reported. Investigations have been carried out on the PRL dye series (PRL-101, PRL-501, PRL-701), which have shown cooperative enhancement of the TPA cross section. Upon photoexcitation, transient absorption measurements have shown the presence of a localized charge-transfer (intramolecular charge transfer, ICT) state independent of branching. The results point to ultrafast localization of charge in this particular system of chromophores. Pump-probe measurements in highly polar solvents have shown the presence of a nonemissive charge-transfer state which is a solvent stabilized and conformationally relaxed state. The population of this nonemissive state increases from monomer to trimer, and thus, it has been used as indicator of the polar nature of the Franck-Condon state. These results have shown an increase of charge-transfer character of the excited state with an increase in branching, and this explains the relative increase in the two-photon cross section of the PRL series.     

Plasma-induced graft copolymerization of poly(methacrylic acid) on electrospun poly(vinylidene fluoride) nanofiber membrane

Electrospun nanofibrous membranes (ENM) which have a porous structure have a huge potential for various liquid filtration applications. In this paper, we explore the viability of using plasma-induced graft copolymerization to reduce the pore sizes of ENMs. Poly(vinylidene) fluoride (PVDF) was electrospun to produce a nonwoven membrane, comprised of nanofibers with diameters in the range of 200-600 nm. The surface of the ENM was exposed to argon plasma and subsequently graft-copolymerized with methacrylic acid. The effect of plasma exposure time on grafting was studied for both the ENM and a commercial hydrophobic PVDF (HVHP) membrane. The grafting density was quantitatively measured with toluidine blue-O. The degree of grafting increased steeply with an increase in plasma exposure time for the ENM, attaining a maximum of 180 nmol/mg after 120 s of plasma treatment. However, the increase in the grafting density on the surface of the HVHP membrane was not as drastic, reaching a plateau of 65 nmol/mg after 60 s. The liquid entry permeation of water dropped extensively for both membranes, indicating a change in surface properties. Field emission scanning electron microscopy micrographs revealed an alteration in the surface pore structure for both membranes after grafting. Bubble point measurements of the ENM reduced from 3.6 to 0.9 um after grafting. The pore-size distribution obtained using the capillary flow porometer for the grafted ENM revealed that it had a similar profile to that of a commercial hydrophilic commercial PVDF (HVLP) membrane. More significantly, water filtration studies revealed that the grafted ENM had a better flux throughput than the HVLP membrane. This suggests that ENMs can be successfully engineered through surface modification to achieve smaller pores while retaining their high flux performance.     

<Superscript>1</Superscript>H and <Superscript>19</Superscript>F NMR relaxation time studies in (NH<Subscript>4</Subscript>)<Subscript>2</Subscript>ZrF<Subscript>6</Subscript> superionic conductor

¹H and ¹⁹F spin-lattice relaxation times in polycrystalline diammonium hexafluorozirconate have been measured in the temperature range of 10–400 K to elucidate the molecular motion of both cation and anion. Interesting features such as translational diffusion at higher temperatures, molecular reorientational motion of both cation and anion groups at intermediate temperatures and quantum rotational tunneling of the ammonium group at lower temperatures have been observed. Nuclear magnetic resonance (NMR) relaxation time results correlate well with the NMR second moment and conductivity studies reported earlier.     

Laser-driven proton acceleration and applications: Recent results

The acceleration of high-energy ion beams following the interaction of short (t < 1 ps) and intense (Iλ² > 10¹⁸ W cm^-2 μm²) laser pulses with solid targets is a field of research currently attracting high interest in the scientific community, due to some of the unique properties of these ion sources, promising routes toward the optimization of their energy content, and a number of possible, innovative applications in the scientific, technological and medical areas. Work on the characterization and development of these sources has progressed enormously over the past few years, thanks to the contribution of many groups worldwide. This paper will report some recent results, obtained in experiments carried out at the RAL and LULI laboratories, in which we investigated the ion acceleration mechanism, developed a technique to control the ion beam divergence and energy spectrum, and applied a proton radiography technique to investigate electric and magnetic field production following laser-matter interaction.